NISSAN 2011 Quest - Owner's Manual - Manual (Page 247)

Black plate (241,1)
Model "E52-D" EDITED: 2010/ 10/ 25
the next track or the beginning of the current
track on the CD will be played.
REPEAT (RPT):
When the RPT button is pushed while the CD is
played, the play pattern can be changed as
follows:
(CD)
Normal Û 1 Track Repeat
(CD with compressed audio files)
Normal ? 1 Folder Repeat ? 1 Track Repeat ?
Normal
RANDOM (RDM):
When the RDM button is pushed while a CD is
being played, the play pattern can be changed
as follows:
(CD)
Normal Û 1 Disc Random
(CD with compressed audio files)
Normal ? 1 Disc Random ? 1 Folder Random
? Normal
CD EJECT:
When the CD EJECT button is pushed with the
CD loaded, the CD will be ejected.
When this button is pushed while the CD is
being played, the CD will be ejected.
If the CD comes out and is not removed, it
will be pulled back into the slot to protect
it.
AUX (Auxiliary) input
AUX IN jack:
The AUX IN jack is located on the audio unit.
The AUX IN audio input jack accepts any
standard analog audio input such as from a
portable cassette tape/CD player, MP3 player or
laptop computer.
AUX (Auxiliary) button:
When the AUX button is pushed with no device
plugged into the jack, the audio system does not
change to the AUX mode.
NISSAN strongly recommends using a stereo
mini plug cable when connecting your music
device to the audio system. Music may not play
properly when a monaural cable is used.
SAA3599
USB memory operation
Audio main operation:
The USB outlet connector is in the front center
console box. Connect a USB memory as
illustrated. Then, switch to the USB memory
mode automatically.
If the system has been turned off while the USB
memory was playing, pushing the ON·OFF/VOL
control knob will start the USB memory.
PLAY:
When the AUX button is pushed with the system
off and the USB memory inserted, the system
will turn on.
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-63