NISSAN 2011 Quest - Owner's Manual - Manual (Page 252)

Black plate (246,1)
Model "E52-D" EDITED: 2010/ 10/ 25
Switching the display:
. Models with satellite radio
Pushing the DISC·AUX button will switch the
displays as follows:
iPod ® /USB ? CD/DVD ? Music Box ® ?
Bluetooth ® Audio (if so equipped) ? AUX ?
iPod ® /USB
. Models without satellite radio
Pushing the DISC button will switch the display
as follows:
CD/DVD ? Music Box ® ? CD/DVD
Pushing the AUX button will switch the display
as follows:
USB/iPod ® ? AUX
FM-AM-SAT (if so equipped) radio op-
eration
When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.
The last channel played will also come on when
the ON·OFF button is pushed to ON.
If another audio source is playing when the radio
band select button is turned on, the audio
source will automatically be turned off and the
last radio channel played will come on.
When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
radio (FM/AM) band select:
Pushing the radio band select button will
change the band as follows:
AM ? FM1 ? FM2 ? AM
radio (SAT) band select (if so
equipped):
Pushing the radio band select button will
change the band as follows:
XM1 ? XM2 ? XM3 ? XM1
The satellite radio is not available in Alaska,
Hawaii and Guam.
TUNE (Tuning):
. For AM and FM radio
Turn the radio TUNE knob for manual tuning.
. For XM Satellite Radio (if so equipped)
Turn the radio TUNE knob to seek channels
from all of the categories when any category
is not selected.
or / SEEK tuning/CATE-
GORY (CAT):
. For AM and FM radio
Push the SEEK button or to tune
from low to high or high to low frequencies
and to stop at the next broadcasting station.
. For XM Satellite Radio (if so equipped)
Push the SEEK button or to tune
to the first channel of the next or previous
category.
During satellite radio reception (if so equipped),
the following notices will be displayed under
certain conditions.
. NO SIGNAL (No signal is received while the
SAT tuner is connected.)
. OFF AIR (Broadcasting signed off)
. CHECK ANTENNA (Antenna connection
error)
. LOADING (When the initial setting is
performed)
. UPDATING (When the satellite radio sub-
scription is not active)
4-68 Monitor, heater, air conditioner, audio, phone and voice recognition systems