NISSAN 2011 Quest - Owner's Manual - Manual (Page 271)

Black plate (265,1)
Model "E52-D" EDITED: 2010/ 10/ 25
Recording CDs
1. Operate the audio system to play a CD. For
the details of playing CDs, see “FM-AM-SAT
RADIO WITH COMPACT DISC (CD)
PLAYER” earlier in this section.
2. Select the “Start REC” (models with naviga-
tion system)/“REC” (models without naviga-
tion system) key.
NOTE:
. The system starts playing and record-
ing the 1st track on the CD when the
“Start REC” key is selected.
. The recording process can be stopped
at any time. All tracks that were played
before the CD was stopped are stored.
. Individual tracks can be deleted from
the hard drive/flash memory after the
CD is recorded.
SAA2514
Models with navigation system
SAA2613
Models without navigation system
If the title information of the track being recorded
is stored either on the hard drive/flash memory
or the CD, the title is automatically displayed on
the screen. For title acquisition from the hard
drive/flash memory, music recognition technol-
ogy and related data are provided by Grace-
note
® .
If a track is not recorded successfully due to the
CD skipping, the
mark is displayed behind
the track number.
The Music Box ® hard drive/flash memory cannot
perform recording under the following condi-
tions.
. There is not enough space on the hard
drive/flash memory
. The number of albums reaches the maximum
of 500.
. The number of tracks reaches the maximum
of 3,000.
Automatic recording:
If the “Automatic Recording” function is turned
on, recording starts when a CD is inserted. (See
“Music Box
® settings” later in this section.)
Stopping recording:
To stop the recording, select the “Stop REC”
key button by touching the screen or using the
multi-function controller.
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-87