NISSAN 2011 Quest - Owner's Manual - Manual (Page 153)

Black plate (147,1)
Model "E52-D" EDITED: 2010/ 10/ 25
The power sliding door system will allow you to
open or close the sliding doors automatically
using the door handles, the sliding door switch,
the Intelligent Key or sliding door one-touch
switch.
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the door.
CAUTION
. Operate the power sliding door
when the vehicle is completely
stopped.
. Before operating the power sliding
door, be sure to ensure safety
around the door.
. Do not operate the power sliding
door when the vehicle is inclined
considerably.
. Do not insert your hand into the
sliding door rail. If you touch the
cable at the rail, the door could
operate automatically.
PRECAUTIONS ON POWER SLIDING
DOOR OPERATION
. Do not perform the power sliding door
operation frequently when the engine
is stopped. This could cause a dis-
charged battery.
. Do not start the engine while the
sliding door is in an power operation.
The door may not operate properly.
. Make sure that the sliding doors are closed
before starting the vehicle.
. Under the following cases, turn the power
door main switch off:
. When the sliding door is malfunctioning.
. When operating the sliding door manu-
ally.
. When you need to keep the sliding door
open for a period of time.
. When washing the vehicle or performing
any maintenance work.
SPA2071
. Be careful not to damage the sensor *
1 of
the sliding door.
When reconnecting the battery cable with the
sliding door open (in case of a discharged
battery, etc.), be sure to fully close the sliding
door manually once before performing the
power operation. Otherwise, the power open
or close function may not operate properly.
POWER SLIDING DOOR (if so
equipped)
Pre-driving checks and adjustments 3-9