Dell Open Manage Print Manager Software - Manual (Page 138)

138 Discovery
1 In the Context Name field, type a valid context name.
2 In the User Name field, type a valid user name.
NOTE: In the Discovery window, the User Name field is mandatory and must not be left blank.
NOTE: Both Authentication and Privacy options are selected by default. You can select Authentication and
Privacy, or only Authentication, or none. Based on the selection, related fields are displayed.
3 In the Authentication Password field, type a valid password. The password field shows ’*’ for
characters entered.
4 In the Confirm Password field, re-type the password to confirm the authentication password.
5 In the Authentication Algorithm field, select MD5 for Message Digest Algorithm or SHA for Secure
Hash Algorithm.
6 In the Privacy Password field, type a valid password. The password field shows ’*’ for
characters entered.
7 In the Confirm Password field, re-type the password to confirm the privacy password.
8 In the Privacy Algorithm field, select DES for Data Encryption Standard or AES for Advanced
Encryption Standard.
NOTE: Password should be a minimum of 8 characters and must not exceed 255 characters. If the entered and
confirmed passwords do not match, then ’Confirm Password ’ text box will be highlighted in red. You have to re-
enter the password and confirm.
Field Description
Context Name Indicates named subset of the Management Information Base (MIB) objects
by an agent.
User Name Indicates the name of the user.
Authentication Password Indicates the password used by the authentication protocol for authenticating
the messages.
Authentication Algorithm Indicates the protocol used to authenticate the messages sent or received by
the user.
Privacy Password Indicates the password used by the privacy protocol for encrypting and decrypting
the messages.
Privacy Algorithm Indicates the protocol used to encrypt the messages sent or received by the user.