Document Outline

• Read this first
  • Contacting Dell
• Contents
• Figures
• Tables
• Safety and environmental notices
  • Safety notices
  • Laser safety and compliance
  • Performing the safety inspection procedure
  • Rack safety
• Preface
• Chapter 1. Product description
  • Front panel
  • Cartridge magazine
  • Rear panel
  • Bar code reader
  • SAS host interface
  • Encryption
  • Supported Internet Protocols
  • Simple Network Management Protocol (SNMP) messaging
  • Network Time Protocol
  • Ultrium tape drives
  • Media
  • Logical Unit Number (LUN) scanning
  • Location coordinates and element addresses
  • Library specifications
  • Product environment
  • Supported device drivers
• Chapter 2. User interfaces
  • Operator Panel
  • Web User Interface
• Chapter 3. Installation and configuration
  • Choosing a location
  • Installing in a rack
  • Removing the accessor locking screw
  • Attaching the library to a server
  • Configuring the library
    • Configuring your library with the Web User Interface
      • Logging in to the Web User Interface
      • Checking firmware level
      • Configuring library settings
      • Configuring network settings
      • Configuring date and time settings
      • Configuring encryption settings
      • Configuring email notifications
      • Configuring trap notifications
      • Managing user access
      • Saving the library configuration
    • Configuring your library with the Operator Panel
      • Logging in to the Operator Panel
      • Configuring network settings
      • Configuring library settings
  • Populating the library with cartridges
  • Verifying library and drive operation
  • Taking the Library Online
  • Registering for support notification
• Chapter 4. Operations
  • The Operator Panel
    • Monitoring the library
      • Configuration settings
      • Current information
      • Firmware revision
    • Managing the library
      • Unlocking the I/O station
      • Unlocking the cartridge magazine
      • Moving cartridges
      • Unloading the drive
      • Cleaning the drive manually
      • Conducting a library inventory
      • Taking the library online and offline
      • Powering down the library
      • Shipping the library
      • Rebooting the drive
      • Rebooting the library
      • Logging out of the library
    • Configuring the library
      • Configuring auto cleaning
      • Configuring the number of active slots
      • Configuring the library access mode
      • Configuring date and time settings
      • Configuring network settings
      • Configuring Operator Panel settings
      • Setting the library to factory defaults
    • Servicing the library
      • Checking the library error status
      • Running library verify diagnostic procedures
      • Running drive diagnostic procedures
  • The Web User Interface
    • Monitoring the library
      • The system summary
      • The library map
    • Managing the library
      • Moving cartridges
      • Unloading the drive
      • Cleaning the drive manually
      • Taking the library online and offline
      • Conducting a library inventory
      • Unlocking the cartridge magazine
    • Configuring the library
      • Managing user access
      • Configuring physical library settings
      • Configuring logical library settings
      • Configuring network settings
      • Configuring encryption settings
      • Configuring date and time settings
      • Configuring email notifications
      • Configuring SNMP trap notifications
      • Saving and restoring configuration settings
    • Servicing the library
      • Operator interventions
      • Library logs
      • Trace data
      • Downloading drive logs
      • Downloading library logs
      • Resetting the library and drives
      • Updating library and drive firmware
      • Accessor statistics
• Chapter 5. Media
  • Data cartridges
    • Cartridge compatibility
  • Write once, read many (WORM) cartridges
    • WORM media
    • Data security on WORM media
    • WORM media errors
    • Requirements for WORM capability
  • Cleaning cartridge
  • Bar code labels
    • Guidelines for the use of bar code labels
  • Write-Protect switch
  • Cartridge care and handling
    • Provide training
    • Ensure proper packaging
    • Provide proper acclimation and environmental conditions
    • Perform a thorough inspection
    • Handle the cartridge carefully
    • Examples of cartridge problems
  • Environmental and shipping specifications for tape cartridges
• Chapter 6. Troubleshooting
  • How the library reports problems
  • Library error message content
  • Diagnosing a problem
  • Isolating problems
  • Installation and configuration problems
  • Interpreting front panel LEDs
  • Reseating cables
  • Emailing logs
• Chapter 7. Service procedures
  • ITDT-DCR
  • Contacting Dell technical support
• Chapter 8. Removal and replacement procedures
  • Required tools
  • Replacing a defective cartridge magazine
  • Unlocking the cartridge magazine manually
• Appendix A. Error codes
  • Library error codes
  • Drive error codes
  • Web User Interface error messages
  • Trap definitions (types)
• Appendix B. TapeAlert flags
  • TapeAlert flags supported by the library
  • TapeAlert flags supported by the Ultrium tape drive
• Appendix C. Sense data
  • Sense Key definitions
  • Library sense data
  • Tape drive sense data
• Appendix D. Library Configuration Form
• Accessibility
• Glossary
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W