Kontron CG2200 Carrier Grade Server - Manual (Page 103)

96
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
System ID LED
To light the System ID LED, use one of the following two methods:
•
Press the System ID button on the front control panel of the chassis. The ID LED displays as
solid white on the front panel and solid blue on the rear of the server until the button is pressed
again.
•
Issue the appropriate hex IPMI “Chassis Identify” value. The ID LED will either blink for 15
seconds and turn off or will blink indefinitely until the hex IPMI “Chassis Identify” value is re-
issued to turn it off.
System Status LED
The bicolor (green/amber) System Status LED