Kontron CG2200 Carrier Grade Server - Manual (Page 122)

115
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
10.2.3 Europe (CE Declaration of Conformity)
This product has been tested in accordance to, and complies with, the Low Voltage Directive (73/23/EEC)
and EMC Directive (2004/108/EC). The product has been marked with the CE Mark to illustrate its
compliance.
10.2.4 VCCI (Japan)
English translation of the notice above:
This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI)
from Information Technology Equipment. If this is used near a radio or television receiver in a domestic
environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
10.2.5 BSMI (Taiwan)
The BSMI Certification Marking and EMC warning is located on the outside rear area of the product.
10.2.6 Regulated Specified Components
To maintain the UL listing and compliance to other regulatory certifications and/or declarations, the
following conditions must be adhered to and the following regulated components must be used.
Interchanging or using other components will void the UL listing and other product certifications and
approvals.
1. Add-in boards must have a printed wiring board flammability rating of minimum UL94V-1. Add-in
boards containing external power connectors and/or lithium batteries must be UL recognized or UL
listed. Any add-in board containing modem telecommunication circuitry must be UL listed. In addition,
the modem must have the appropriate telecommunications, safety, and EMC approvals for the region
in which it is sold.
2. Peripheral Storage Devices must be a UL recognized or UL listed accessory and TUV or VDE
licensed. Maximum power rating of any one device is 19 watts. Total server configuration is not to
exceed the maximum loading conditions of the power supply.