Kontron CG2200 Carrier Grade Server - Manual (Page 57)

50
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Figure 35. Installing a PCIe/PCI-X Add-In Card in the Riser Card Assembly
11. Using the two blue touch points, install the riser card assembly into its slot (slot 2 or slot 5) on the
baseboard. (Figure 36, “C” and “D”)
12. Secure the riser card assembly by tightening the captive screws (“A” and “B”).
13. If this is the last task you are performing, replace the processor air duct, the riser card assembly, and
the back chassis cover.
Reconnect all the external devices and plug in the power cord(s)