Kontron CG2200 Carrier Grade Server - Manual (Page 60)

53
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
6. Attach one end of the cable to the top of the module and the other end to the connector on the server
board. (Figure 39, “A” and “B”)
Figure 39. Connecting the RMM4 Cable
7. Line the module up with rear panel of the chassis so that the NIC is positioned in the connector slot.
(Figure 40, “A”)
Use the two smaller screws in the package to fasten the bracket to the rear panel below the NIC. (“B”)
Figure 40. Installing the RMM4 NIC Module