Kontron CG2200 Carrier Grade Server - Manual (Page 54)

47
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Figure 33: DC Power Supply Grounding
4.6 Installing a PCI Riser Card
The CG2200 server does not ship with a PCI riser card, just the sheet metal bracket where the riser card
and PCI add-in cards are housed. The server board has two riser slots t riser cards on the right side and
left side of the chassis. Baseboard PCIe slot 2 and PCIe slot 5 support the riser boards in the CG2200
system. Baseboard PCIe slot 2 supports a single slot PCIe X16 riser and a dual slot PCIe X8 riser. These
risers are referred to as the “left side’ risers since the boards plug in on the left side of the chassis as
viewed from the front of the server. Baseboard PCIe slot 5 supports a single slot PCIe X16 riser, a dual
slot PCIe X8 riser, and a dual PCI-X active riser. These risers are referred to as the “right side” risers
since the boards plug in on the right side of the chassis. :
Table 7 identifies the card configurations and the connector types used.