Kontron CG2200 Carrier Grade Server - Manual (Page 47)

40
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Figure 25. Removing the Drive Carrier
4.2.2 Installing a Hard Drive in a Carrier
1. If the drive carrier is empty (that is, if you are installing a drive in it for the first time), remove the black
plastic filler panel by unfastening the four screws that attach it to the carrier. (Figure 26, “A”).
Set the screws aside for use with the new drive.
2. If a drive is already installed (that is, if you are replacing the drive), remove it by unfastening the four
screws that attach the drive to the drive carrier. (Figure 26, “A”)
Set the screws aside for use with the new drive.
3. Lift the drive (or filler panel) out of the carrier. (“B”)