Canon IMAGERUNNER 2010F - Manual (Page 112)

Redialing When the Line Is Busy 3-29
Basic Sending
3
Redialing When the Line Is Busy
If the other party’s line is busy or if there is no answer, the machine waits two
minutes, then tries to dial the same number again. This feature is called “Automatic
Redialing.” You can also manually redial the number by pressing [Pause/Redial] on
the control panel.
Automatic Redialing
After the initial dialing attempt, the machine dials the same number again after a
specified amount of time has elapsed.
If Auto Redial is set to ‘01 ON’, the number of redialing attempts and the time
interval between attempts can be set.
You can set up the following options for automatic redialing:
• The number of times the machine attempts to redial (default setting: ‘02 times’)
• The time interval the machine waits between redialing attempts (default setting: ‘2
minutes’)
• How the machine handles redialing when a transmission error occurs (default
setting: ‘ERROR & 1ST PAGE’)
NOTE
The default Auto Redial setting is ‘01 ON’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS>
➞ press [OK].
The FAX SETTINGS menu appears.
Additional Functions
F3
F4
OK