Canon IMAGERUNNER 2010F - Manual (Page 226)

Using Relay Broadcasting 7-19
Rela
y Broadcasting
7
Using Relay Broadcasting
Follow this procedure to use relay broadcasting.
1
Create a memory box for relay broadcasting on your machine.
For details on this procedure, see “Creating a Relay Group,” on p. 7-5.
2
Tell the originator machine the ITU-T subaddress and
password of your relay box.
3
Have the originator unit send a document to your relay box.
When your machine receives a document in its relay box, it relays the document
to the other registered fax machines.
NOTE
• You can select to print the relay document your machine receives from the
originator. (See “Relay Broadcasting Memory Box Settings Table,” on p. 7-3.)
• If you have preset the time to start relay broadcasting, the machine starts sending
the document to the other fax machines at the preset time.
• The relay document in the relay box is deleted from memory automatically after it is
sent.