Canon IMAGERUNNER 2010F - Manual (Page 63)

Setting Up Speed Dialing 2-18
Speed Dialing
2
The message <DATA ENTRY OK> appears on the screen for about two
seconds, and the display returns to the TX TIME SETTING menu.
NOTE
• If you want to cancel the time or set other optional settings, press (BACK).
• If you made a mistake entering the time, use the cursor keys to go back to the digit
you want to correct
➞ enter the correct digit.
• To delete the entire entry, press (Clear).
● If you want to select the transmission type:
❑
Press [F3] (
▼) or [F4] (▲) to highlight <03 TX TYPE> ➞ press [OK].
<01 REGULAR TX>: Sends a document to the registered fax number, without
using a subaddress or password.
<02 CONFIDENTIAL TX>: Sends a document to the registered fax number
using the confidential mailbox feature.
<03 ORIG RELAY TX>: Sends a document to the registered fax number for a
relay broadcast.
<04 SUBADDRESS TX>: Sends a document with an ITU-T subaddress and/or
password to the registered fax number.
<05 POLLING RX>: Sends a polling request to the registered fax number that
holds the document you would like to receive.
❑
Press [F3] (
▼) or [F4] (▲) to highlight a transmission type ➞ press [OK].
❑
Set the ITU-T subaddress and password for the TX TYPE setting you select.
Press [F3] (
▼) or [F4] (▲) to select <01 PASSWORD> or <02 SUBADDRESS>
➞ enter the subaddress or password using the numeric keys ➞ press [OK].
The display returns to the OPTIONAL SETTING menu.
F3
F4
OK
F3
F4
OK
F3
F4
OK
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS