Canon IMAGERUNNER 2010F - Manual (Page 61)

Setting Up Speed Dialing 2-16
Speed Dialing
2
12
Press [F3] (
▼) or [F4] (▲) to set the desired optional setting ➞
press [OK].
The display for setting the item you selected appears. The optional settings
include the following items:
Item Description
ACCESS CODE
Registers an access code from two to five digits to
represent a fax number. (See “Access Code Dialing,”
on p. 2-27.)
TX TIME SETTING
Preset a time to send documents stored in memory
automatically.
TX TYPE
Designates the transactions as transmissions to a
confidential mailbox, part of a relay broadcast, or an
answer to a polling request. You can also set the ITU-T
subaddress and password for each feature.
INTERNATIONAL
If you experience transmission errors during
international sending, change the international setting
to <INTERNATIONAL 1> and try to send the document
again. If the problem persists, select <INTERNATONAL
2>. If you still encounter a transmission error, select
<INTERNATIONAL 3>.
TX SPEED
If transmission errors occur frequently while sending in
33.6 Kbps, select a slower speed: 14.4 Kbps, 9.6 Kbps,
4.8 Kbps, or 2.4 Kbps.
ECM TX
ECM (Error Correction Mode) reduces system and line
errors during sending or receiving with another fax
machine that supports ECM.
TX LINE SELECTION
If the optional Canon Super G3 FAX Expansion Kit-B1
is installed, you can set either telephone line for
outgoing fax transmissions.
SENDER NAME
Sets the sender’s name to appear on the documents
the other party receives.
F3
F4
OK