Creating a transfer box, Creating a transfer box -20 – Canon IMAGERUNNER 2010F User Manual

Page 173

Advertising
background image

Transferring Documents

5-20

Receiving Documents

5

NOTE

•

If the transfer mode is set to ‘OFF’, the machine does not transfer documents.

•

The machine can transfer documents received in normal receive mode. It cannot transfer
documents received in the memory box or by polling receiving.

•

You can set the machine to transfer documents only from selected originators (SELECT
ORIG UNIT).

•

The destination fax number must be registered for one-touch or coded speed dialing.

•

The transfer mode is set to ‘OFF’ at the default setting.

•

If you made a mistake when setting the file name, location, password, originator unit, and
printing of the RX document, use the cursor keys to go back to the position you want to
correct

➞ press

(Delete)

➞ enter the correct value.

•

To delete the entire entry, press

(Clear).

•

If you made a mistake entering the start time or end time, use the cursor keys to go back
to the digit you want to correct

➞ enter the correct digit. To delete the entire entry, press

(Clear).

•

If you set <SELECT ORIG UNIT>, the machine checks the last six digits of the fax
number registered under one-touch or coded speed dialing. Therefore, if the fax number
does not have six digits, this function does not work.

Creating a Transfer Box

1

Press [Additional Functions].

The ADDITIONAL FUNCTIONS menu appears.

2

Press [F3] (

▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞

press [OK].

Each time you press

(

▼) or

(

▲), the next or previous menu option

becomes highlighted.

The FAX SETTINGS menu appears.

Additional Functions

F3

F4

OK

F3

F4

Advertising