Canon IMAGERUNNER 2010F - Manual (Page 97)

Adjusting the Resolution, Density, and Image Quality 3-14
Basic Sending
3
3
Press [F1] (RESOLUTION), [F2] (DENSITY), or
[F3] (IMAGEQUALITY).
Press (RESOLUTION) repeatedly to select the desired resolution
setting.
Press (DENSITY) repeatedly to select the desired scanning density.
Press (IMAGEQUALITY) repeatedly to select the desired the image
quality setting.
4
After adjusting the scan settings, press [OK].
5
Specify the destination.
You can specify the destination using various sending methods. (See “Using
Regular Dialing,” on p. 3-27,, “Using Speed Dialing,” on p. 2-30, or “Redialing
When the Line Is Busy,” on p. 3-29.)
If necessary, set other sending modes, before specifying the destination. (See
“Sending Methods,” on p. 3-21, or Chapter 4, “Additional Sending Features.”)
6
Press [Start].
Scanning starts.
F1
F2
F3
F1
F2
F3
OK
Start