Canon IMAGERUNNER 2010F - Manual (Page 256)

Polling Receiving 9-5
Using P
olling
9
3
Press [F3] (
▼) or [F4] (▲) to highlight <01 POLLING> ➞ press
[OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The POLLING menu appears.
4
Press [F3] (
▼) or [F4] (▲) to highlight <02 POLLING RX> ➞
press [OK].
The display returns to the Fax Basic Features screen.
NOTE
For information about the procedure to send a document using polling sending, see
“Polling Sending,” on p. 9-22.
5
Specify the destination
➞ press [OK].
You can specify the destination using various sending methods. (See “Using
Regular Dialing,” on p. 3-27, “Using Speed Dialing,” on p. 2-30, or “Redialing
When the Line Is Busy,” on p. 3-29.)
If necessary, set other sending modes, before specifying the destination. (See
“Sending Methods,” on p. 3-21, or Chapter 4, “Additional Sending Features.”)
If you use the numeric keys to specify the destinaion, be sure to press
(OK) at the end of the number.
The display returns to the Fax Basic Features screen.
F3
F4
OK
F3 F4
F3
F4
OK
OK