Using tone dialing on a pulse line, Using tone dialing on a pulse line -2, See “using tone dialing on a pulse line,” on – Canon IMAGERUNNER 2010F User Manual
Page 285: P. 10-2.), Press [hook] ➞ specify the destination, Press [hook
Using Tone Dialing on a Pulse Line
10-2
Special F
ax F
eatures
10
Using Tone Dialing on a Pulse Line
Many telephone information services for banks, airline reservations, hotel
reservations, etc., require tone dialing for accessing their services. If your machine
is connected to a rotary pulse line, follow the procedure below to set the machine to
tone dialing temporarily.
1
Press [Hook]
➞ Specify the destination.
2
When the recorded message of the information service
answers, open all three one-touch speed dialing panels
➞
press [Tone].
To adjust the speaker volume, slide the speaker volume switch on the control
panel.
3
Use the numeric keys to enter the numbers requested by the
information service.
4
If you are requested to switch the machine to the receive
mode, press [Start].
5
Press [Hook].
Hook
Tone
1
2
3
4
5
6
7
8
9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER
SYMBOLS
Start
Hook