Access code dialing, Access code dialing -27 – Canon IMAGERUNNER 2010F User Manual

Page 72

Advertising
background image

Setting Up Speed Dialing

2-27

Speed Dialing

2

13

Press [Reset] to return to the Fax Basic Features screen.

Access Code Dialing

Follow the procedure below to assign an access code of two to five digits to
represent a fax number.

You can assign the access code to

(#) or any one-touch speed dialing key.

NOTE

The default setting is ‘02 DO NOT USE’.

1

Press [Additional Functions].

The ADDITIONAL FUNCTIONS menu appears.

2

Press [F3] (

) or [F4] () to highlight <03 FAX SETTINGS>

press [OK].

Each time you press

(

▼) or

(

▲), the next or previous menu option

becomes highlighted.

The FAX SETTINGS menu appears.

3

Press [F3] (

) or [F4] () to highlight <07 SYSTEM

SETTINGS>

press [OK].

If a System Administrator ID and password are set, enter them after selecting
<07 SYSTEM SETTINGS>

➞ press [OK].

For information on entering or setting the System Administrator ID and password,
see Chapter 6, “System Manager Settings,” in the Reference Guide.

The SYSTEM SETTINGS menu appears.

Reset

Additional Functions

F3

F4

OK

F3

F4

F3

F4

OK

Advertising