Canon IMAGERUNNER 2010F - Manual (Page 220)

Setting Up Your Machine as a Relay Unit 7-13
Rela
y Broadcasting
7
24
If you want to set a preset time for your documents to be
relayed, press [F3] (
▼) or [F4] (▲) to highlight <09 TX START
TIME>
➞ press [OK].
The TX START TIME menu appears.
25
Press [F3] (
▼) or [F4] (▲) to highlight a preset time number
(from 01 to 05)
➞ press [OK].
You can set up to five times every day for the machine to relay documents.
The display for entering the TX start time appears.
26
Enter the time to start the relay broadcast in 24-hour notation
(e.g. 1:00 p.m. as 13:00) using the numeric keys
➞ press [OK].
The message <DATA ENTRY OK> appears on the screen for about two seconds,
and the display returns to the TX start time menu.
27
To continue setting the TX start time, repeat steps 25 and 26
➞
when you are finished setting the TX start times, press
[BACK].
The display returns to the SETUP FILE menu.
F3
F4
OK
F3
F4
OK
OK
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS
BACK