Canon IMAGERUNNER 2010F - Manual (Page 77)

Using Speed Dialing 2-32
Speed Dialing
2
1
Press [FAX].
lights, and the machine enters the Fax Basic Features screen.
2
Place your documents on the machine.
For instructions explaining how to place your documents, see “Placing
Originals,” on p. 3-6.
NOTE
• You can adjust the resolution, density and image quality, (See “Adjusting the
Resolution, Density, and Image Quality,” on p. 3-12.)
• You can also specify a sender’s name with (TTI Selector). (See “Sending a
Document with a Sender Name,” on p. 3-15.)
3
Press [Coded Dial].
<CODEDDIAL> is displayed.
4
Enter the three-digit code assigned to the number you want to
dial using the numeric keys.
The registered number and name are displayed.
After five seconds (10 seconds for sequential broadcasting), the machine starts to
scan and send the document automatically.
NOTE
• If you enter the wrong code, press (Clear)
➞
(Coded Dial)
➞ enter the
correct code.
• If you have preset a time to send documents to the number registered under the
coded speed dialing code, the machine will send the documents at the preset time.
• If you want to cancel the transmission after you enter the coded speed dialing
code, press
(Stop).
FAX
FAX
Coded
Dial
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS
C