Canon IMAGERUNNER 2010F - Manual (Page 129)

Transmission Settings 4-6
Additional Sending F
eatures
4
Automatic Document Deletion after a Failed Transmission
Follow the procedure below to set whether to delete a document after a
transmission error occurs.
NOTE
The default setting is ‘02 ON’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS>
➞ press [OK].
The FAX SETTINGS menu appears.
ç
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 TX SETTINGS> ➞
press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The TX SETTINGS menu appears.
3
Press [F3] (
▼) or [F4] (▲) to highlight <04 ERASE FAILED TX>
➞ press [OK].
The ERASE FAILED TX menu appears.
Additional Functions
F3
F4
OK
F3
F4
OK
F3 F4
F3
F4
OK