Canon IMAGERUNNER 2010F - Manual (Page 303)

Changing the Fax Default Settings 10-20
Special F
ax F
eatures
10
12
If you want to set the transmission mode, press [F3] (
▼) or
[F4] (
▲) to highlight <05 TX MODE> ➞ press [OK].
The TX MODE menu appears.
13
Press [F3] (
▼) or [F4] (▲) to select either <01 MEMORY
SENDING> or <02 DIRECT SENDING>
➞ press [OK].
<01 MEMORY SENDING>: Scans all pages into memory, and then sends them.
<02 DIRECT SENDING>: Starts scanning the document and sends the
document one page at a time without storing the document into memory.
The display returns to the FAX DEFAULT menu.
14
If you want your documents stamped after every
transmission, press [F3] (
▼) or [F4] (▲) to highlight <06 TX
STAMP>
➞ press [OK].
The TX STAMP menu appears.
F3
F4
OK
F3
F4
OK
F3
F4
OK