Canon IMAGERUNNER 2010F - Manual (Page 125)

Transmission Settings 4-2
Additional Sending F
eatures
4
Transmission Settings
This section explains how to set additional fax transmission functions.
Setting Up the ECM for Sending
ECM (Error Correction Mode) reduces the effect of system and line errors on
documents that occur during sending or receiving with another fax machine that
supports ECM. If the other machine does not support ECM, this setting is ignored.
If transmission speed appears extremely slow, you may be able to speed up
transmission time by turning ECM ‘02 OFF’.
IMPORTANT
• If you want to communicate using ECM, it is necessary take the ECM function be set in
both the destination machine and the sending machine.
• Even if you set ECM, errors can sometimes occur if the telephone line is in poor
condition.
• If there is trouble with the telephone line, transmissions take longer to complete.
NOTE
The default setting is ‘01 ON’.
1
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The FAX SETTINGS menu appears.
Additional Functions
F3
F4
OK
F3 F4