Creating a relay group, Creating a relay group -5, Y group,” on p. 7-5, “creating a preset – Canon IMAGERUNNER 2010F User Manual
Page 212
Setting Up Your Machine as a Relay Unit
7-5
Rela
y Broadcasting
7
•
If you made a mistake entering the TX start time, use the cursor keys to go back to the
digit you want to correct
➞ enter the correct digit. To delete the entire entry, press
(Clear).
•
If you set <SELECT ORIG UNIT>, the machine checks the last six digits of the fax
number registered under one-touch or coded speed dialing. Therefore, if the fax number
does not have six digits, this function does not work.
Creating a Relay Group
1
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
press [OK].
Each time you press
(
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The FAX SETTINGS menu appears.
3
Press [F3] (
▼) or [F4] (▲) to highlight <06 FILE SETTINGS> ➞
press [OK].
The FILE SETTINGS menu appears.
Additional Functions
F3
F4
OK
F3
F4
F3
F4
OK