Platen glass, Platen glass -8 – Canon IMAGERUNNER 2010F User Manual

Page 91

Advertising
background image

Placing Originals

3-8

Basic Sending

3

Platen Glass

You should use the platen glass when scanning bound originals (such as books
and magazines), originals on heavy or lightweight paper, and transparencies into
memory.

1

Lift up the feeder.

IMPORTANT

This machine is equipped with an open/close sensor on the underside of the feeder
(see circled area in the above illustration). When placing originals on the platen
glass, lift the feeder above 11 7/8" (30 cm) so that the sensor detaches from the
underside of the feeder. If the sensor does not detach from the underside of the
feeder, the size of the originals may not be detected correctly.

2

Place your original face down.

The surface that you want to scan into memory must be placed face down. Align
the top edge of your original with the back edge of the platen glass (by the arrow
in the top left corner).

Place books and other bound originals on the platen glass in the same way.

Advertising