Canon IMAGERUNNER 2010F - Manual (Page 40)

Registering the Required Sender Information 1-19
Bef
ore
Y
ou Use the F
ax Functions
1
The display returns to the TX TERMINAL ID menu.
NOTE
• If you selected <02 I-FAX> or <03 FTP> in step 4, the display for selecting the TTI
POSITION appears. You also cannot select <TEL NUMBER MARK>.
• If you set the TX TERMINAL ID to ‘01 ON’, your ID is printed on every document
the other party receives. (See “Registering the Sender Information (TX Terminal
ID),” on p. 1-16.)
7
Press [Reset] to return to the Fax Basic Features screen.
Registering Sender Names
Follow the procedure below to register sender names. Registering alternative
sender names is optional, but you may want to register sender names if several
people are using the same machine to send documents.
If each user registers his or her personal name as a sender name, you can select
one of these names just before sending a document, their name instead of the
unit's name, will be printed at the top of the documents they send.
NOTE
• You can register up to 99 sender names.
• For details on how to set the TX Terminal ID, see “Registering the Sender Information (TX
Terminal ID),” on p. 1-16.
• To enter a sender’s name, you can also press (TTI Selector) when you scan the
document for sending. (See “Sending a Document with a Sender Name,” on p. 3-15.)
1
Press [Additional Functions] ➞ press [F3] (
▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
Reset
Additional Functions
F3
F4
OK