Canon IMAGERUNNER 2010F - Manual (Page 295)

Setting the RX Password 10-12
Special F
ax F
eatures
10
Setting the RX Password
Follow the procedure below to set the reception password.
When another fax sends a document without ITU-T subaddress, its password will
be confirmed.
If the password does not match the password you set here, or no password is set
for the document sent by another fax, this machine will not receive the document.
When receiving in memory boxes, their passwords have the priority even if you set
an RX password here.
1
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The FAX SETTINGS menu appears.
3
Press [F3] (
▼) or [F4] (▲) to highlight <07 SYSTEM
SETTINGS>
➞ press [OK].
If a system administrator’s ID and password are set, enter them after selecting
<07 SYSTEM SETTINGS>. (See Chapter 6, “System Manager Settings,” in the
Reference Guide.)
The SYSTEM SETTINGS menu appears.
Additional Functions
F3
F4
OK
F3 F4
F3
F4
OK