Canon IMAGERUNNER 2010F - Manual (Page 134)

Sequential Broadcasting to More Than One Location 4-11
Additional Sending F
eatures
4
Sequential Broadcasting to More Than One
Location
Sequential Broadcasting enables you to scan your documents once, and send
them to several locations. When you use Sequential Broadcasting, you can send
the same document to a maximum of 210 destinations.
NOTE
• If you frequently send the same documents to several locations, use group dialing. Group
dialing enables you to register up to 199 facsimile numbers, and send the same
documents to these numbers with the press of only one or four keys. (See “Group
Dialing,” on p. 2-21.)
• If you use Sequential Broadcasting frequently, and you want to make sure that all
transactions are complete, set the machine to print the Multi TX (Transaction) Report.
(See “Printing the Multi TX Report,” on p. 4-13.)
• You can only print out the Multi TX (Transaction) Report when you use Sequential
Broadcasting.
1
Press [FAX].
lights, and the machine enters the Fax Basic Features screen.
2
Place your documents on the machine.
For instructions explaining how to place your documents, see “Placing
Originals,” on p. 3-6.
NOTE
• You can adjust the resolution, density, and image quality. (See “Adjusting the
Resolution, Density, and Image Quality,” on p. 3-12.)
• You can also specify a sender's name with (TTI Selector). (See “Sending a
Document with a Sender Name,” on p. 3-15.)
3
Specify the destinations by entering the fax numbers one
after the other.
There are three methods you can use to enter the numbers for Sequential
Broadcasting.
FAX
FAX