CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 18)

9145 NID Software User’s Manual
8 The World Leader in Fiber Optic Communications Systems
4. At the COM Properties dialog, on the Port Settings tab, check for these selections:
a. Bits per second: 9600 bps
b. Data bits: 8
c. Parity: None
d. Stop bits: 1
e. Flow control: None
5. Click OK. HyperTerminal connects to the system and the VT100 terminal emulation starts.
2.2 Setting Up SNMP Network Management
The 9145 communicates with CanogaView or your Network Management Platform in-band via
the transported Ethernet Network.
2.2.1 Network Management Platform Set-up
Industry standard Management Information Bases (MIBs) are required on your Network Manage-
ment Platform in order to successfully communicate with the 9145 using SNMP. Before you start,
check that these industry-standard MIBs are loaded:
• Standard MIB
• Dot2sd.mib
• Etherlike.mib
• If.mib
• Bridge.mib
• Pbridge.mib
Additionally, Canoga Perkins Private MIBs are needed on the Management Platform. The
Canoga Perkins Private MIBs are available in a password protected area on the Canoga Perkins
web site. If you do not yet have a Canoga Perkins Username and Password, please contact Tech
Support.
• cp.mib
• cpaccounts.my
• cpdot3oam.my
• cphosttb.my
• cpifmib.my
• cplicense.my
• cpnpa.my
• cppbvc.my
• cpping.my
• cpradius.my
• cpsecurity.my
• cpsntp.my
• cpsysinf.my
• cpsyslog.my
• cpsystemlog.my
• cptraptb.my
• dot3oam.my
• hcrmon.my
• ifmib.my
• ping.my
• rmon.my