6 radius client configuration – CANOGA PERKINS 9145 NID Software Version 6.0 User Manual
Page 33
9145 NID Software User’s Manual
The World Leader in Fiber Optic Communications Systems
23
Figure 3-11. System Information Screen
Type the number of the attribute you wish to enter information about, then press <Enter>. Type in
new information for that attribute, or, to change existing information, use <Backspace> to remove
current information, then type in the new information. To change the view between Local and
Remote units, type [15], "Unit," press <Enter>. Pressing <Space> cycles between the options.
Press <Enter> to select an option.To return to the Main Menu, press <Esc>. When finished, use
<Enter> to save the settings, then <Esc> to return to the System Configuration menu.
3.6 RADIUS Client Configuration
The customer can use the Radius Client Configuration screen to configure the 9145 for Remote
Authentication Dial-In User Service (RADIUS) Authentication of user. The 9145 implements
Radius Passthru for user authentication by a RADIUS Server. From the System Configuration
menu, type 6 and press <Enter>. The
RADIUS
Client Configuration screen (see Figure 3-12)
opens. On the
RADIUS
Client Configuration screen, type the number of the RADIUS setting you
wish to change, then press <Enter>. Use <Backspace> to remove any existing entry, type in your
entry, and press <Enter>. When entries are completed, press <Esc> to return to the System Con-
figuration menu.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-2008
Model 9145-4 V06.0 F121 02:59:35
---------------------SYSTEM INFORMATION - LOCAL UNIT------------------------
1. System Name
:
2. Contact
:
3. Location
:
4. Customer
:
5. Information
:
:
6. Circuits
:
:
7. Service Code
:
8. Date-in-Service
:
9. Date-Out-of-Service
:
10. Equipment Type
:
11. Equipment Code
:
12. Vendor
: Canoga Perkins
13. CLEI :
14. Mfg Date
: 10/01/2005
15. Unit
: Local
Select [1-15]:
------------------------------------Messages------------------------------------