CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 51)

9145 NID Software User’s Manual
The World Leader in Fiber Optic Communications Systems 41
NOTE: Maximum allowable frame size pertains to customer traffic only.
Reference Chapter 4, Latency/Jitter Test and Ping Generation for
minimum and maximum test packet payload sizes.
Maximum Frame Size - Sets the maximum allowable Ethernet Frame size the 9145 will for-
ward. Enter the maximum frame size between 1518 and 10000
Sideband Management - Enables or disables SideBand Management Channel (SMBC)
communications with a remote 9145, L351 or L357. Use <Space> to toggle between
Enabled or Disabled.
5.2.3 VLAN Configuration
Type 3 and press <Enter> to access the VLAN Configuration menu. The VLAN Configuration
menu (see Figure 5-6) allows the customer to display and configure the VLAN parameters. When
all VLAN functions have been set, press <Esc> to return to the Port Configuration menu.
Figure 5-6. VLAN Configuration menu
5.2.3.1 VLAN Rules
Type 1 and press <Enter> to access the VLAN Rules screen. Use the VLAN Rules screen (see
Figure 5-7) to configure the VLAN parameters listed below. Type the item number of the item you
wish to change and press <Enter>. Use <Tab> or <Enter> to change columns. Use <Space> to
toggle between Yes and No. Type VLAN IDs and Priorities into the designated areas. Use
<Enter> to accept changes. When all VLAN parameters have been set, press <Esc> to return to
the VLAN Configuration menu.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
-------------------------------VLAN CONFIGURATION-------------------------------
1) VLAN Rules
2) User Port VLAN ID Translation Table
3) Extension Port VLAN ID Translation Table
4) P-Bit Translation Tables
Select [1-4]:
------------------------------------Messages------------------------------------