CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 62)

9145 NID Software User’s Manual
52 The World Leader in Fiber Optic Communications Systems
7.2 Reset Configuration To Default
NOTE: Resetting Configuration to Default does NOT clear the entries in the
Static ARP Table.
To reset the configuration to the default settings, type 2 and press <Enter>. At the bottom of the
Utilities menu after “Reset configuration with factory default values and reset module?”, type Y or
N and press <Enter> to confirm. All values will be returned to factory settings and the system will
be reset. Log back onto the network i.a.w. the instructions in Chapter 1, then type
6, and press
<Enter> to return to the Utilities Menu.
7.3 Change Password
To change your current password, from the Utilities menu, type 3 and press <Enter>. The
Change Password screen (see Figure 7-2) appears.
8. Type in the current password and press <Enter>.
9. Type in the new password and press <Enter>.
10. Retype the new password and press <Enter>.
Figure 7-2. Change Password Screen
7.4 VT100 Baud Rate
To change the VT100 baud rate, from the Utilities menu, type 4 and press <Enter>. The baud
rate setting will be highlighted. Use <Space> to toggle between 9600 and 19200. Press <Enter>
to confirm setting.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
-------------------------------CHANGE PASSWORD----------------------------------
Please enter your current password : *****
Please enter your new password: *****
Please enter your new password again : *****
:------------------------------------Messages------------------------------------