CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 19)

9145 NID Software User’s Manual
The World Leader in Fiber Optic Communications Systems 9
2.2.2 9145 Set-up
There are several TCP/IP and SNMP parameters that need to be configured before accessing
the 9145 from CanogaView or your Management Platform. These parameters include TCP/IP
Address, Authorized Host List and Privileges. These parameters are initialized using a VT-100
Terminal connected to the 9145’s RS-232 Serial Port. Reference Chapter 3 for details on config-
uring these parameters.
2.3 Management User Interface
The Management User Interface for the 9145 provides screens for setup, monitoring, and diag-
nostics. You can access the screens directly by connecting to the serial port of the 9145 or using
Telnet.
2.3.1 General Screen Format
A typical screen (see Figure 2-1), includes standard descriptions and reference designations.
Use this and other screens to configure the system, set operational parameters, and verify the
system status. All screens use a common method for navigation.
Figure 2-1. General Screen Format
Not all menus provide options that you can change. Some menu items open screens that only
report status, such as revision numbers, module type, or alarms. On other screens, you can
select options or enter data. Use the following methods to navigate screens:
Space bar - When a menu item is highlighted, press <Space> to cycle through all options for
that item.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-2008
Model 9145-4 V06.0 F121 02:59:35
---------------------------------------MAIN MENU--------------------------------
1) System Configuration
2) Diagnostics
3) Port Information
4) System Alarms
5) System Log
6) Utilities
7) Software Upgrade
8) Manage Logged In Users
9) 802.3AH OAM
10) Logout
Select [1-10]:
------------------------------------Messages------------------------------------
MODEL
MENU
NAVIGATION
INSTRUCTIONS
MESSAGES &
URGENT STATUS