2 vlan loopback statistics, 3 l2 ping generator – CANOGA PERKINS 9145 NID Software Version 6.0 User Manual
Page 44
9145 NID Software User’s Manual
34
The World Leader in Fiber Optic Communications Systems
MD Level - To change the maintenance domain (MD) level, type 3 and press <Enter>. Use
<Backspace> to remove current setting, then type in the new setting. Press <Enter> to con-
firm setting.
Ether Type - To change the ether type, type 4 and press <Enter>. Use <Backspace> to
remove current setting, then type in the new setting. 0000 indicates all types except IP4.
Press <Enter> to confirm setting. Press <Esc> to return to the VLAN Loopback menu.
4.4.2 VLAN Loopback Statistics
To view current VLAN loopback statistics, type 2 and press <Enter> The VLAN Loopback Statis-
tics (Current) screen (see Figure 4-7) appears. Press <Ctrl+S> to clear current counters.
Press <Ctr+T> to view raw counter. Press <ESC> to return to the Loopback Configuration
screen.
Figure 4-7. VLAN Loopback Statistics Screen
4.4.3 L2 Ping Generator
To set up the L2 Ping generator, type 3 and press <Enter>. The L2 Ping Generator screen (see
Figure 4-8) appears.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
--------------------VLAN LOOPBACK STATISTICS (CURRENT)--------------------
User
Port
Ext
Port
LBM
Transmitted:
0
0
LBM Received:
0
0
LBM Mismatched:
0
0
LBR Transmitted:
0
0
LBR Received:
0
0
LBR Out Of Sequence:
0
0
LBR
Unexpected:
0
0
Enter Control-R to Clear, Control-T to Raw Counter, ESC to Exit:
------------------------------------Messages------------------------------------