CANOGA PERKINS 9145 NID Software Version 6.0 User Manual

Page 41

Advertising
background image

9145 NID Software User’s Manual

The World Leader in Fiber Optic Communications Systems

31

Packet Priority - Set packet priority from 0 to 7, with 0 being the highest priority.

Figure 4-3. Latency/Jitter Test Screen

Packet DSCP Code (0 - 63) - The Differentiated Services Code Point (DSCP) code classify
packets in a Diffserv network. Other network devices that support Diffserv use the DSCP
code in the IP header to select a PHB behavior for the packet and provide the appropriate
QoS treatment.

Packet DF Bit - The DF Bit is an identifier in the packet that lets other network devices know
if this packet can be fragmented to smaller packets.

Test Duration min:sec - Sets the amount of time the test will run in minutes and seconds. A
setting of 0 will allow the test to run forever.

Min Test Payload Size (40 - 1954) - Set the minimum test packet size, in bytes. The 9145
sends test packets ranging in size from the minimum packet setting to the maximum packet
setting, if they are different. The minimum packet size must be less than, or equal to, the
maximum packet size.

Max Test Payload (40 - 1954) - Set the maximum test packet size, in bytes. The maximum
packet size must be equal to, or greater than, the minimum packet size.

Start/Stop test - Start and Stop testing.

Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35

------------------------------------LATENCY/JITTER TEST-------------------------


Test IP Addr/VLAN

0.0.0.0/0

Round Trip Packets 0

Test Duration

00:00

Dropped Packets

0

Minimum Latency (ms) 0.000000

Minimum Jitter (ms) 0.000000

Average Latency (ms)

0.000000

Average Jitter (ms)

0.000000

Maximum Latency (ms) 0.000000

Maximum Jitter (ms) 0.000000

Far End PBit Sent

0/Rcvd ?

Local PBit Sent

?/Rcvd 0

Far End DSCP Sen

0/Rcvd ?

Local DSCP Sent

?/Rcvd 0


1) To IP Addr

0.0.0.0

5) Packet Timeout sec (1-10)

3

2)From IP Addr

Auto Selection

6) Packet Priority (0-7)

0

3) Test VLAN

0

7) Packet DSCP Code (0-63)

0

4) Test Packets per sec

1

8) Packet DF Bit

Clear

9) Test Duration min:sec (0=forever)

0

10) Min Test Payload Size (40 - 1954)

40

11) Max Test Payload Size (40 - 1954)

40

12)

Start/Stop

Test


Select [1-12]:

------------------------------------Messages------------------------------------

Advertising