CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 26)

9145 NID Software User’s Manual
16 The World Leader in Fiber Optic Communications Systems
Figure 3-3. Management IP configuration Menu
3.1.3 Auxiliary IP Configuration
On the Auxiliary IP Configuration menu (see Figure 3-4), the customer can set or modify values
for the auxiliary system parameters. Access the options by typing the corresponding number and
pressing <Enter>. Press <Space> to highlight multiple local settings and <Tab> to access entries
in the Remote column if needed. Enter data or press <Space> to cycle through the options
described below. To return to the IP/SNMP Agent Configuration Menu, press <Esc>. To return to
the System Configuration menu, press <Esc> again.
Auxiliary IP Address - Sets the 9145 Auxiliary IP Address.
Auxiliary Subnet Mask - Sets the 9145 Auxiliary IP Subnet Mask.
Inband Auxiliary Port - Allows the customer to select No Ports, User Port Only, Ext Port
Only, or Both Ports.
Auxiliary VLAN Tagging - Enables or Disables VLAN Tagging.
Auxiliary VLAN Number - Allows the customer to select VLAN number.
Allow Any VLAN - Enables or Disables acceptance of any VLAN number.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-2008
Model 9145-4 V06.0 F121 02:59:35
-----------------------------MANAGEMENT IP CONFIGURATION--------------------
Local Remote
Offline
MAC Address 00 40 2A 00 DD 72
Management Port UP
1) Manager IP Address 172.016.142.116
Subnet Mask 255.255.000.000
Default Gateway 172.016.001.001
2) Test IP Address 000.000.000.000
Test Subnet Mask 255.255.255.000
3) Inband Management Port Both Ports
4) Management VLAN Tagging Disabled
5) Management VLAN Number 1
6) SLIP/PPP IP Address
000.000.000.000
7) Serial Port Config VT100
8) Telnet Security Disabled
9) Reply to Broadcast Ping Disabled
Select [1-9]:
------------------------------------Messages------------------------------------