CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 43)

9145 NID Software User’s Manual
The World Leader in Fiber Optic Communications Systems 33
4.4 VLAN Loopback
The VLAN Loopback feature provides the ability to insert loopback capability on VLAN. From the
Diagnostics menu, type 4 and press <Enter>. The VLAN Loopback menu (see Figure 4-5)
appears.
Figure 4-5. VLAN Loopback Menu
4.4.1 802.1AG Loopback Configuration
To configure the loopback feature, type 1 and press <Enter>. The 802.1AG Loopback Configura-
tion screen (see Figure 4-6) appears.
Figure 4-6. 802.1AG Loopback Configuration screen
Administration State - To enable or disable the Administration State, type 1 and press
<Enter>. Toggle between Enable and Disable. Press <Enter> to confirm setting.
VLAN ID - To enter a VLAN ID or a range, type 2 and press <Enter>. Use <Backspace> to
remove current setting, then type in the VLAN ID or range. Press <Enter> to confirm setting.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
---------------------------------VLAN LOOPBACK----------------------------------
1) 802.1AG Loopback Configuration
2) VLAN Loopback Statistics
3) L2 Ping Generator
Select[1-3]:
------------------------------------Messages------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
----------------------802.1AG LOOPBACK CONFIGURATION----------------------
1) Administration State Enabled
2) VLAN ID (1-4094) 1-4094
3) MD Level (0-7) 0-7
4) Ether Type (4 Hex Digits) 8902
Select[1-4]:
------------------------------------Messages------------------------------------