CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 50)

9145 NID Software User’s Manual
40 The World Leader in Fiber Optic Communications Systems
5.2.2 Functional Configuration
Type 2 and press <Enter> to access the Functional Configuration screen. The Functional Config-
uration screen (see Figure 5-5) displays the User and Extension port speed and duplex informa-
tion, and allows the customer to set the functions listed below. When the functions have been set,
press <Esc> to return to the Port Configuration menu.
User Port Setting - Use <Space> to toggle between 10M Half, 10M Full, 10M Auto, 100M
Half, 100M Full, 100M Auto, 10/100M Auto, 1000M Half, 1000M Full, 10/100/1000M Auto,
and Disabled. Use <Space> to toggle between 100M Full, 100M Half, and Disabled
Ext Port Setting - Use <Space> to toggle between 100M Half, 100M Full, and Disabled.
NOTE: RMTF only applies to optical ports.
RMTF - Use <Space> to toggle between Ext Port Enabled and Disabled
Figure 5-5. Functional Configuration Menu
Link Loss Fwd - Enables or Disables Link Loss Forwarding (LLF). Use <Space> to toggle
between User->Extension, Extension->User, Both Directions, or Disabled.
Flow Control - Enables or Disables flow control on the Remote port. Use <Space> to toggle
between Ext Port Enabled or Disabled.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-1970
Model 9145-4 V06.29 F117 02:59:35
----------------------------------FUNCTIONAL CONFIGURATION----------------------
Local Remote
Offline
User Port Speed/Duplex Link Down
Ext
Port Speed/Duplex 10M/Full
1) User Port Setting 100M Full
2) Ext Port Setting 10/100/1000M Auto
3) RMTF Disabled
4) Link Loss Fwd Disabled
5) Flow Control Disabled
6) Maximum Frame Size 10000
7) Sideband Management Disabled
Select [1-7]:
------------------------------------Messages------------------------------------