3 layer 2 statistics, 4 rmon group 1 statistics – CANOGA PERKINS 9145 NID Software Version 6.0 User Manual
Page 56
9145 NID Software User’s Manual
46
The World Leader in Fiber Optic Communications Systems
User Port Manager MAC Filter - When enabled, the 9145 will block Management traffic
from being sent to the User Port. Use <Space> to toggle between User Port Enabled and Dis-
abled.
User Port Test Network Filter - When enabled, the 9145 will block Test Traffic from being
sent to the User Port. Use <Space> to toggle between User Port Enabled and Disabled.
4.802.3ah OAM PDU Filter - When enabled, the 9145 will block 802.3ah OAM PDU frames
from being sent to the User Port. Use <Space> to toggle between Enabled and Disabled.
UDLD Filter - When enabled, the 9145 will block UDLD frames from being sent to the User
Port. Use <Space> to toggle between User Port Enabled, Ext Port Enabled, Both Ports
Enabled, and Disabled.
Management VLAN Filter - When enabled, the 9145 will block Management traffic received
on the specified port. Choices are Disabled, User Port Enabled, Ext Port Enables and Both
Ports Enabled
5.3 Layer 2 Statistics
To view Layer 2 statistics, from the Port Information screen (see Figure 5-1), type 3 and press
<Enter>. The Layer 2 Statistics screen (see Figure 5-11) appears. Follow the instructions at the
bottom of the Layer 2 Statistics screen to view the information listed below. Press <Esc> to return
to the Port Information screen.
Change Counter Frame Size - Type C and press <Enter>. Type in the desired frame size,
between 1 and 10,000, then press <Enter> to accept change.
View Layer 2 Error Statistics - Type e and press <Enter> to view the Layer 2 Error Statistics
screen (see Figure 5-12).
View the Layer 2 Frame Type Statistics - Type t and press <Enter> to view the Layer 2
Frame Type Statistics screen (see Figure 5-13).
View Raw Layer 2 Statistics - Type <Ctr+T> to view raw layer 2 statistics
Reset Counters - Type <Ctrl+R> to reset the counters.
5.4 RMON Group 1 Statistics
To view Remote Monitoring Specification (RMON) statistics, from the Port Information screen
(see Figure 5-1), type 4 and press <Enter>. The RMON Group 1 Statistics screen (see Figure 5-
14) appears. Follow the instructions at the bottom of the RMON Group 1 Statistics screen to view
the information listed below. Press <Esc> to return to the Port Information screen.
Select the Next Screen - Type m and press <Enter> to page through all available screens.
View Raw Counters - Type <Ctrl+R> to view the raw RMON Group 1 Statistics
Reset Counters - Type <Ctrl+r> to reset the counters.