CANOGA PERKINS 9145 NID Software Version 6.0 - Manual (Page 24)

9145 NID Software User’s Manual
14 The World Leader in Fiber Optic Communications Systems
3.1 IP/SNMP Agent Configuration
The Management IP and Auxiliary IP Addresses are for managing and conducting performance
testing on a TCP/IP network. From the System Configuration menu, type 1 and press <Enter>.
The IP/SNMP Agent Configuration menu (see Figure 3-2) appears. From the IP/SNMP Agent
Configuration Menu, the customer can set or change the current Management IP configurations;
set or change the current Auxiliary IP configurations; and add, edit, or delete Host Table entries
and Trap Table entries. To return to the System Configuration menu, press <Esc>.
Figure 3-2. IP/SNMP Agent Configuration Menu
3.1.1 IP Addresses
The 9145 has three types of IP addresses.
Management IP - Used to manage the 9145 remotely on a TCP/IP Network.
Test IP - Used to send hot probes in order to collect performance data using the PM and
SAM optional features.
Aux IP - Auxilary IP is available for restricted use. The service provider can allow a customer
to use the Aux IP on the user port for diagnostic purposes.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Jan-2008
Model 9145-4 V06.0 F121 02:59:35
-------------------------------IP/SNMP AGENT CONFIGURATION----------------------
1) Management IP Configuration
2) Auxiliary IP Configuration
3) Host Table
4) Trap Table
Select [1-4]:
------------------------------------Messages------------------------------------