CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 24)

9145E10G NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
12
3.1 IP/SNMP Agent Configuration
The IP/SNMP Agent Configuration menu (Figure 3-2.) configures the Management IP, Test IP,
and Auxiliary IP settings; and is used to add, edit, or delete Host Table and Trap Table entries.
The Management IP, Test IP, and Auxiliary IP Addresses are used for managing and conducting
testing on a TCP/IP network.
Figure 3-2. IP/SNMP Agent Configuration Menu
3.1.1 Management IP Configuration
The Management IP Configuration menu (Figure 3-3.), is used to configure the management IP
of the 9145E10G, including the subnet mask, gateway, and management VLAN. It is also used to
configure which ports can be used for management access. See your network administrator for
information and help with determining the appropriate parameters.
1. Manager IP Address - Used to set the 9145E10G Manager IP Address.
Subnet Mask - Used to set the 9145E10G Manager IP Subnet Mask.
Default Gateway - Used to set the IP Address of the Default Gateway.
2. Manager Port - Used to select the port(s) to allow Management Communication access.
Options include: Both User and Net Ports, Net Port Only, User Port Only, Management
UTP Port Only, or No Ports Allowed.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-------------------------------IP/SNMP AGENT CONFIGURATION---------------------
1) Management IP Configuration
2) Auxiliary IP Configuration
3) Host Table
4) Trap Table
Select [1-4]:
------------------------------------Messages-----------------------------------