CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual

Page 56

Advertising
background image

9145E10G NID Software User’s Manual

Diagnostics

Latency/Jitter Test

44

The leg of the trip (Local to Far End or Far End to Local) on which the P-Bit remarking or DSCP
change is occurring will be identified. It is assumed that each Latency/Jitter test that is initiated
will take a particular path, so each round trip overwrites the previous round trip values.

1. Test IP Addr/VLAN - The destination IP address and VLAN for the currently test or the

last test completed.

2. Round Trip Packets: - Number of completed round trips.

3. Test Duration: - The length of time the test has been running, or the length of the last

test run.

4. Dropped Packets: - Number of packets sent which received no response.

5. Minimum Latency (ms) - Time in ms for the shortest round trip.

6. Minimum Jitter (ms) - Smallest absolute time difference between 2 round trips.

7. Average Latency (ms) - Computed by adding all the round trip latencies and dividing by

the number of completed round trips.

8. Average Jitter (ms) - Computed by adding all the absolute time differences between

successive round trips and dividing by the number of completed round trips minus 1.

9. Maximum Latency (ms) - The highest time interval for a successful round trip.

10. Maximum Jitter (ms) - The highest absolute time difference between 2 successful

round trips.

11. Far End PBit Sent - This is the programmed priority value entered in the far end device..

12. Far End PBit Rcvd - This is the priority as it was received at the destination 9145/9145E/

9145E10G.

13. Local PBit Sent - The programmed priority value is put back into the packet at the far

end for the return trip.

14. Local PBit Rcvd - This is the priority as it was received at the end of the Round Trip.

15. Far End DSCP Sent - This is the programmed DSCP.

16. Far End DSCP Rcvd - This is the DSCP that was received at the destination 9145/

9145E/9145E10G.

17. Local DSCP Sent - The programmed DSCP value is put back into the packet at the far

end for the return trip.

18. Local DSCP Rcvd - This is the DSCP that was received at the end of the Round Trip.

Advertising