Figure 3-14. security configuration menu – CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual
Page 39
System Configuration
9145E10G NID Software User’s Manual
Security Configuration
27
non-alpha, and non-numeric characters.Enter a value from 0 through 15 Valid punctua-
tion characters include:
Figure 3-14. Security Configuration Menu
5. Maximum Consecutive Character Types - Specifies the number of alpha, numeric, or
punctuation characters that can be used consecutively. Enter a value from 1 through 15.
6. Maximum Same Character - Specifies the maximum number of times that any character
may be repeated within the password. This includes alpha, numeric or punctuation char-
acter types. Enter a value between 0 and 15.
7. Allow Username In Password - Determines if the user’s account name can be within
any part of the password. Use Space to cycle between Enabled and Disabled.
8. Password Expiration Time - The number of days until the password expires and a new
one is required. Enter a value between 1 and 365. A setting of 0 disables this feature. If
the password expires, the Supervisor will have to reset the password.
CAUTION: If the Supervisor password has expired, the 9145E10G NID will
have to be sent to Canoga PerkinsTechnical Support to be reset.
9. Password Reuse Count - The number of password expirations a user must wait until a
password can be reused. When set to 0, the user can reuse their current password with
no count limitation. When set to 1, a password can be reused after one password reset.
!
@
#
$
%
^
&
*
(
)
_
+
-
,
<
.
=
~
‘
;
:
‘
“
[
{
]
}
\
|
>
/
?
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------SECURITY CONFIGURATION-----------------------------
PASSWORD CONFIGURATION
1. Minimum Length : 0
2. Minimum Alpha Characters : 0
3. Minimum Numeric Characters : 0
4. Minimum Punctuation Characters : 0
5. Maximum Consecutive Character Types : 0
6. Maximum Same Character : 0
7. Allow username in password : Enabled
8. Password Expiration Time : 0
9. Password Reuse Count : 0
LOCKOUT/LOGOUT CONFIGURATION
10. Lockout After Failed Attempts : 0
11. Lockout Type : Hard
Lockout time : 0
12. Display Lockout Message : Disabled
13. Lockout Message : Account has been locked out
14. Lockout Craft Port : Disabled
15. Inactivity Logout time (mins) : 0
Select [1-15]:
-----------------------------------Messages------------------------------------