CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 97)

Software Upgrade 9145E10G NID Software User’s Manual
Get Software Upgrades with TFTP
85
8.4 Get Software Upgrades with TFTP
Software can be downloaded from the Canoga Perkins web site to your TFTP server. After down-
loading the software, move the file to a known directory to which your TFTP server has access.
To download the latest version from your TFTP server to the 9145E10G, from the Software
Upgrade menu (Figure 8-1.) type 4 and press Enter. The TFTP Upgrade screen (Figure 8-2.) will
appear.
Figure 8-2. TFTP Software Upgrade Screen
1. Enter the IP Address of the Host TFTP server or press Enter to accept default address.
2. Enter the file name of the software you want to download and press Enter.
a. Type Y and press Enter to begin the download. Progress can be viewed in the
message line.
b. Type N and press Enter to cancel the download and return to the Software
Upgrade screen.
3. When the download is complete, press Enter to return to the Software Upgrade screen.
The new software version should appear in the Inactive Firmware field. If Swap Bank
after download and reset was set, the message: Loads xx.xx on Next Reset will appear
on the message line.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------------TFTP SOFTWARE UPGRADE------------------------
Time Since Last Restart 03:27:41
Host IP Address : 172.16.142.197
Save in Non Volatile RAM? : Y
File Name: 9145E10G2.0
File transfer to unit now ? Y
TFTP transfer in progress...\
----------------------------------Messages-------------------------------------