CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 63)

Diagnostics 9145E10G NID Software User’s Manual
Network Performance
51/(52 Blank)
After starting a Layer 2 Ping, the following statistics will appear on the bottom half of the screen:
1. First Transaction ID: - Transaction identifier for the first LBM sent out in this test.
2. LBM Transmitted: - Number of LBMs sent out in this test.
3. LBR Received: - Number of valid LBRs been received in this test.
4. LBR Out Of Sequence: - Number of LBRs been received in this test, which are out of
sequence.
5. LBR Unexpected: - Number of unexpected LBRs received during this test.
4.5 Network Performance
The Canoga Perkins' Performance Collection System (PCS) is a suite of tools that permits the
monitoring and collection of network performance attributes, namely Frame Delay (FD), Frame
Delay Variation (FDV), Frame Loss Ratio (FLR), and Availability. Network performance and
availability reports may be generated to determiney if the service objectives were met. Below is a
brief description of the three netwrok perfromance functions. For detailed instructions on setting
up and using these functions, please reference the CanogaView Service Level Agreement User
Guide, product number 6912641.
Figure 4-9. Network Performance Screen
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-----------------------------NETWORK PERFORMANCE-------------------------------
1) Profile
2) Address List
3) Test Distribution Connection
4) Trap Configuration
5) Statistics
6) PM Scheduler
7) PM Test Results
8) PM Manual Test
9) SAM Scheduler
10) SAM Results Log
11) Protected Link PM
Select [1-11]: -
-----------------------------------Messages-----------------------------------