CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 34)

9145E10G NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
22
Figure 3-11. V3-Trap Notification Type Parameter
7. If V3-Inform was selected (Figure 3-12.):
a. Type in the Security Name and press Enter.
b. Type in the SNMP Engine ID and press Enter.
c. Cycle through the Authentication Protocol setting (MD5, SHA, or None) using the
Space Bar. Press Enter to accept the setting.
d. Type in the Authentication Password and press Enter. Type in the password again
and press Enter. The Authentication Key will automatically be entered (It can be
modified to match the SNMP manager's key if needed.).
e. Cycle through the Privacy Protocol settings (DES or None) using the Space Bar
and press Enter to accept the setting.
f. Type in the Privacy Password, if required, and press Enter, then type in the pass-
word again and press Enter. The Privacy Key will automatically be entered (It can
be modified to match the SNMP manager's key if needed.).
g. Cycle through the Security Levels (No Auth/No Priv, Auth/No Priv, or Auth/Priv)
using the Space Bar and press Enter to accept the setting.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------------EDIT TRAP/NOTIFICATION TYPE------------------
IP Address : 172.002.015.032
Trap/Notification Port : 125
Notification Type : V2c-Inform
1. Community Name : Private
2. Retries : 5
3. Timeout in Seconds : 30
Select [1-3]: -
----------------------------------Messages-----------------------------------