CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 66)

9145E10G NID Software User’s Manual Port Information
Link Status
54
5.1 Link Status
Link Status informs you of the current link status of the User, Network, and Management UTP
ports of the 9145E10G and provides information on User and Network Port XFP transmit (Tx)
and receive (Rx) power. From the Port Information screen (Figure 5-1.), select Link Status (1)
and press Enter. The Link Status screen (Figure 5-2.) opens. The Link Status screen provides
transmissions counters for each port. These counters illustrate how many LinkDown/LinkUp tran-
sitions have occurred at each port. To reset the counter, press CTRL-R. Press Esc to return to
the Port Information screen.
Figure 5-2. Link Status Screen
5.2 Port Configuration
Use the Port Configuration functions to obtain hardware information, view and modify the func-
tional and VLAN configurations, manage the various port filters, and to add, delete, and edit
VLAN controls.
At the Port Information screen (Figure 5-1.), select Port Configuration (2) and press Enter. The
Port Configuration screen opens. The following paragraphs describe each item on the Port Con-
figuration menu. Press Esc to return to the Port Information screen.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------------LINK STATUS----------------------------------
Link State Transitions
---------- -----------
User Port Link Up 0
Network Port Link Up 0
MP Port (Gig) Admin Up 0
MGMT UTP Port Admin Down 0
Optic Status:
User XFP Rx Power No Power
User XFP Tx Power -2.0dBm
Network XFP Rx Power -2.2dBm
Network XFP Tx Power -2.6dBm
MPP SFP Rx Power -4.8dBm
MPP SFP Tx Power No Power
CTRL-R to Reset the Link State Transition count or ESC to go back
------------------------------------Messages-----------------------------------